Product Details
Place of Origin: China
Brand Name: SFT
Model Number: ZKLF1560.2RS
Payment & Shipping Terms
Minimum Order Quantity: negotiable
Price: negotiable
Packaging Details: carton,pallet
Delivery Time: 20-45DAYS
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: 50000PCS/MONTH
Cage: |
Nylon Cage |
Number Of Row: |
Single Row |
Seals Type: |
Open, Seal |
Basic Dynamic Load Rating: |
12800 N |
Contact Angle:: |
30 ° |
Size: |
120x215x40 |
Cage: |
Nylon Cage |
Number Of Row: |
Single Row |
Seals Type: |
Open, Seal |
Basic Dynamic Load Rating: |
12800 N |
Contact Angle:: |
30 ° |
Size: |
120x215x40 |
Thrust Angular Contact Ball Bearing ZKLF1560-2RS XL
structure as a separate outer ring, two and a half of inner ring and ball cage components and sealing ring. , is made up of two direction of 60 ° arranged according to O form of angular contact ball bearing contact Angle. •
can withstand the bearing load from two directions can bear radial load. , can be in assembly time is obtained by precise locknut preloading. , a sealing ring or dust cover to prevent the pollution of bearing internal. , bearing is pre-filled with the high quality and long life of compound lithium base grease.
Can then be reproduced by greasing holes, grease lubrication.
can work at 30 ° C to + 120 ° C - (by grease, sealing ring material and plastic cage's decision). , can be used for precise installation of occasions, such as driving screw. • double sealing ring or dust cover.
An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race.
Ceramics such as silicon nitride are now regularly used in such applications due to their low density (40% of steel). These materials significantly reduce centrifugal force and function well in high temperature environments. They also tend to wear in a similar way to bearing steel-rather than cracking or shattering like glass or porcelain.
Most bicycles use angular-contact bearings in the headsets because the forces on these bearings are in both the radial and axial direction.
Axial angular contact ball bearings for screw drives are single, double or triple row precision bearings. Depending on the series, they can support radial forces as well as axial forces in one or both directions. The bearing rings are matched to each other such that a defined preload is achieved when the rings are clamped in place using a precision locknut. Contact seals protect the rolling element system against contamination and moisture. For higher speeds, gap seals can be used.
Types:
single row axial angular contact ball bearings: 7602, 7603, BSB
double row axial angular contact ball bearings: ZKLN, ZKLF
triple row axial angular contact ball bearings: DKLFA.
